12 oz Protective Coatings 163337 PC-Woody Wood Epoxy Paste

<p>PC‐Woody is a two part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood. Sand, drill, nail, prime and paint or stain. Bonding filler for replacement wood. Not brittle. Easy 1:1 mix ratio. When measuring equal parts "A" and "B" we generally recommend eyeballing the amounts but if more precise measurements are desired, based on an average net weight for each size unit we have: Woody 106 grams A to 100 grams B. ADVISEMENT: Staining PC‐Woody is recommended using solid stain. Using semi‐transparent stain is possible but results will vary depending on the stain. Transparent stains that contain only dye will produce disappointing results. Coloring PC‐Woody with tints or dry pigments is sometimes helpful. Stain markers and pencils can add grain.</p>

• Two-part epoxy paste to replace missing or rotted wood is resistant to mildew, dry rot, UV light, and fresh and salt water
  • Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to +200 degrees F
    • High tack helps reduce drips and sags while hardening
      • PC-Woody part B must be mixed with PC-Woody part A in equal volumes on a flat surface with a stiff putty knife, DO NOT ATTEMPT TO MIX WITH GLOVES
        • Not recommended to mix PC-Woody in teaspoon size increments or smaller, simply because of the likelihood of an off-ratio mix